30 ENGINE2.2LDICOR l Using a straight edge and feeler gauge, check evenness of cylinder head parting surface with crank case. If unevenness exceeds specified values, replace cylinder head. l Permissible unevenness of cylinder head mating surface-0.030 mm (Length wise) (Fig. 60) l Permissible unevenness of cylinder head mating surface-0.015mm (Cross wise) NOTE Cylinder head top and bottom surface remachining in service is not permitted. CheckingCylinder HeadMating Surface Fig. 59 l Remove the glow plugs. (Fig. 59) Fig. 60
RkJQdWJsaXNoZXIy MTIwNTUz