Repair Guideline Tester-Display No. Work Instructions Set Value Fault Codes Connection Troubleshooting : Set Value : Causation : 30 ABS REPAIR GUIDELINES 4 Disturbance Ignition on, All valves C2114 Refer to (Including Valve Vehicle standing inactive “Note” failures) Note: On ABS the control unit terminals for the solenoid valves are marked as not accessible in the current flow diagrams and also not accessible on the plug connector of the ABS unit. Testing of the solenoid valve internal resistance is therefore not possible. Reason: The connections, supply voltage to the solenoid valves as well as to the output stages are contained within the electronics unit. • Ignition OFF • ABS,- /EBD and • Inlet-,outlet- solenoid valve’s damage. • Disconnect 26-pin plug from ABS unit Brake warning lamp • ABS unit exchange. and remove assembly from vehicle. illuminate • Install new ABS unit. • Connect 26-pin plug to ABS unit. • Ignition ON • Check the ABS version and control the warning lamps. • All warning lamps illuminate and switch off after a short time
RkJQdWJsaXNoZXIy MTIwNTUz