ABS 26 ANTI-LOCK BRAKES Fig. 20 Fig. 19 REMOVAL / INSTALLATION OF FRONT WHEEL SPEED SENSOR Take proper precaution while disconnecting the wheel speed sensor from vehicle wiring harness, by not damaging pins on connector. 1. Remove harness connector. 2. Remove sensor mounting screw and remove the wheel speed sensor from the steering knuckle. (Fig. 20) 3. Remove the sensor cable anchorage on the front stub axle & chassis long member. 4. Take out the sensor cable connector. 5. Measure speed sensor resistance. Resistance : 1600 W + 320 Inspection of Front Toner ring 1. Jack the vehicle and properly support front of the vehicle. 2. Steer the wheel to extreme steering locks position so that the toner ring on the stubaxle is easily seen. 3. Closely inspect the toner ring by slowly rotating the wheel and remove the dust and mud/iron particles in between teeth. 4. Check for any damaged teeth. (Front toner ring has got 54 teeth) SENSOR SENSOR MTG. SCREW STUB AXLE TONER RING HUB SENSOR (ON STUB AXLE) SENSOR MTG. SCREW STUB AXLE HUB ASSLY TONER RING (ON HUB)
RkJQdWJsaXNoZXIy MTIwNTUz