31 REAR AXLE Fig. 60 Fig. 61 Fig. 62 Fig. 59 Assembly of Differential Assemble Master differential bearings Pt. No. 2698 5890 35 14. Fig. 59 Assemble differential case into carrier. (Less ring gear.) Mount dial indicator with a magnetic base. Locate its tip on that surface of case & force differential assembly to the extreme in the direction towards the indicator. Fig. 60 With force still applied, set indicator to 0.00. Force the differential assembly to the extreme end in the opposite direction. Fig. 61 Repeat the above steps until the same reading is obtained. Fig. 60 Record reading in the format given as ‘A’. Remove master bearing and set aside. Assemble ring gear to case. Note: Use new ring gear screws. Torque ring gear screws to specification. Fig. 62
RkJQdWJsaXNoZXIy MTIwNTUz