9 REAR AXLE SPECIFICATION & SERVICE DATA : Type : Single reduction, salisbury type with hypoid gears. Limited slip differential and semi floating axle shafts. Axle Ratio : 50/11 Weight of Axle : 115 kg. Quantity of Oil : 2.2 Liters Tightening Torque Cover Screws : 38-45 Nm Filling plug : 20-34 Nm Drain Plug : 27-41 Nm Differential Bearing caps screws : 95 - 122Nm Brake Backing plate nut : 41-54 Nm Ring Gears Screws : 95 - 122Nm Drive pinion nut : 285 Nm Lubrication Centre Housing : 2.2 Liters Type of oil : APIGL 5 with friction modifier APIGL 5 without friction modifier (axle without limited slip differential) Glade of oil : Transmission DA 85W90 (axle with limited slip differential) Lubricant change interval : 20000 kms / 12000 miles of vehicle running. Grease for rear Hub (Only at the : 25 gm each, lithium base multipurpose EP2 time of assembly) Pinion Bearing Pre load Torque to rotate drive pinion only : 2.26 - 4.52 Nm Differential Assembly Ring gear to pinion gear Backlash : 0.13 - 0.20 mm Maximum permissible variation between : 0.08 mm checked points. Pre load of Differential side bearing : 0.07 to 0.20 mm Axle End Play The permissible axle end play : 0.025 mm to 0.38 mm max. Gap between Sensor & Toner ring : 0.275 - 1.275 mm (For ABS Version)
RkJQdWJsaXNoZXIy MTIwNTUz