30 FRONT AXLE - 4 X 4 Place the proper thickness depth shim on the pinion gear and install the rear pinion bearing cone. Drive until it seals against the throat face of pinion using Dolley for pressing inner bearing cone on pinion Pt. no. 2704 5890 3316. Fig. 46 Fig. 46 Fig. 47 Fig. 48 Assemble bearing cone, slinger and new pinion seal into housing. Using : Installer, pinion oil seal Pt. no. 2698 5890 3513 and universal Pt. no. 2698 5890 3506. Fig. 47 Apply a light coat of oil to the lip of oil seal. Install new collapsible spacer onto pinion stem and assemble into housing. Assemble end yoke, washer into housing. Note : Collapsible, spacer should rest on bearing inner race, and it can fitted any in one direction. Continue to tighten in small increments until the rotating torque is achieved. Using Holder, yoke Pt. no. 2698 5890 3505 and torque wrench. Fig. 48
RkJQdWJsaXNoZXIy MTIwNTUz