10 FRONT AXLE - 4 X 4 SPECIFICATION AND SERVICE DATA Type : Single reduction, with hypoid gears Independently suspended, with automatic hub locks. Axle ratio : 41/9 - For Veh. with 4DLTC 43/8 - For Veh. with 4PL Weight of axle including brake disc : 105 Kg ± 2.5 % Amount of grease required at each wheel end : 92 gm Final bearing end play : 0.00 to 0.10 mm Maximum torque to rotate Hub, when end play is 0.00 mm : 2.30 Nm To adjust bearing (spindle assembly) (i) Torque inner locknut and lock : 68 Nm (ii) Install outer locknut : 203 to 305 Nm Oil Capacity : 1.2 Lit. ± 3% Lubricant change Interval : At every 20000 kms/12000 miles of operation Tightening Torque Cover Screws : 38-45 Nm Fill Plug : 20-34 Nm Differential Bearing Capscrews : 47-68 Nm Ring Gear Screws : 95-122 Nm Drive Pinion Nut : 217 Nm Min. Drain Plug : 27-34 Nm Spindle to Knuckle Nuts : 34-47 Nm Brake Disc to Hub Flange : 58-70 Nm Hub Lock Screws to Hub : 54-63 Nm Breather : 20-34 Nm Mounting Brackets to Carrier : 54-75 Nm Pinion Bearing Preload Torque to rotate drive pinion only : 1.7-3.9 Nm Backlash Specification Ring gear to pinion gear : 0.13 mm to 0.23 mm Maximum permissible variation between checked points : 0.08 mm Gap between toner ring and sensor (For ABS version) : 0.35 to 1.65 mm
RkJQdWJsaXNoZXIy MTIwNTUz