16 FRONT AXLE - 4X2 D. INSTALLATION OF THE FRONTWHEELS a. Install the front wheels on the hub assy and tighten the wheel nuts by hand. b. Remove the supports, supporting the chassis long member. c. Tighten the wheel nuts to a torque of 12-15 mkg. E. PRE LOAD THE TORSION BAR (For procedure see Installation of torsion bar - Tata Safari - Suspension Group) F. WHEEL ALIGNMENT Check and adjust wheel alignment if necessary. Note: Refer suspension group for wheel alignment procedure. ASSY. FRONT AXLE (DANA SPICER) (NON ABS) Fig. 10
RkJQdWJsaXNoZXIy MTIwNTUz