11 FRONT AXLE - 4X2 Fig. 2 ABS Front Hub Fig. 3 ABS Toner Ring Front Hub D. FRONTHUBASSEMBLYWITHABSTONERRING In addition to the regular axles ABS toner ring is fitted on the wheel hub. While the hub seal is fitted on the inner dia, the toner ring is pressed to the outer dia of the hub and Adapter sensor (bushing) is fitted on the Knuckle assy. respectively. Removal of the ABS Toner ring from the wheel hub - Remove the five bolts and lock washers that secure the hub and the rotor (brake disc). Holding the rotor (brake disc), press the hub out with the help of a dolly or seal installer.Once the hubmoves down, the toner ring comes out of the hub, becomes free and remains on the rotor (brake disc), which can be removed by hand. Assembly of the ABSToner ring on the wheel hub - The toner ring is press fit on the hub outer pressed from the rotor end (brake disc end) and occupies the cavity on the rotor (brake disc). The toner ring fitment is the last operation after pressing the hub seal at the rotor (brake disc) end. It will require a force of 3200 kgs minimum to seat the toner ring fully inside the cavity. Toner Ring
RkJQdWJsaXNoZXIy MTIwNTUz