22 SUSPENSION II REAR 5 LINK SUSPENSION 1. CONSTRUCTIONAL DETAILS (Fig. 29) This type of suspension comprises of 5 links viz. 2 bottom links, 2 top links & 1 panhard rod. Top and bottom links are connected to chassis frame and rear axle through rubber bushes. Panhard rod is connected at one end to chassis frame and at other end to rear axle. Antiroll bar is connected to rear axle andmounted between two links fitted on chassis frame. The upper end of the coil spring rests in the spring seat top located in the bracket on the chassis frame. The lower end of the coil spring rests on the spring seat on the rear axle. 2. SPECIFICATIONSANDRECOMMENDATIONS 2A. TECHNICAL SPECIFICATION Type of suspension : 5 Links suspension Type of spring : Coil spring Details of Shock absorber : Double Type acting with rebound stop Extended length : 548 ± 3 Collapsed length : 358 ± 3 2B. TIGHTENINGTORQUE (in mkg) Top link Bottom link & Panhard rod mounting bolts : 16 Antiroll bar link mounting bolts : 4 Antiroll bar bearing block : 4.5 mounting bolts Shock absorber mounting bolts : 6 to 8.5 Propeller shaft universal joint : 1.8 to 2.2 strap mounting screws 3. SPECIAL TOOLS Part Number Description Puller for installation and 2654 5890 32 05 removal of rubber bush on bottom link Puller for installation and 2658 5890 32 01 removal of rubber bush on top link Puller for installation and 2658 5890 32 02 removal of rubber bush on panhard rod
RkJQdWJsaXNoZXIy MTIwNTUz