10 SUSPENSION REAR JACKING POINT (Below Rear Axle Tube) FRONT JACK (Below Long member) 4. REMOVAL/DISMANTLINGPROCEDURE 4A. REMOVAL OF FRONT WHEELS l Place wheel chokes on both sides of rear wheels to secure the vehicle against any movement. l Slightly loosen the front wheel nuts. l Keep the jack below the long member, behind front wheel and jack up (Fig.4). Support the frame long member behind the front wheel with suitable support. l Similarly jack up other side and support the long member. l Unscrew and remove the wheel nuts. l Remove the front wheels. 48. REMOVAL OF FRONT ANTIROLL BAR (Fig. 2) l Unscrew and remove the nuts holding the antiroll bar to the bracket on lower wishbone and remove the bolt, cups, sleeve and rubber bushes (Fig.5). l Unscrew and remove the hex. screws holding the antiroll bar bearing block (rubber) and lamp with the bracket on chassis frame long member. l Remove the bearing block (rubber) and clamp from the antiroll bar assembly. l Take out the antiroll bar. 4C. REMOVAL OF FRONT SHOCK ABSORBER (Fig.3) l Unscrew and remove the nyloc nut holding the shock absorber top (Fig.6). Remove the spacer and bush. l Unscrew and remove the bolt connecting the shock absorber bottomwith mounting bracket on lower wishbone. l Compress the shock absorber and remove it. 3. SPECIAL TOOLS Description Part Number Adaptor for lower wishbone 2699 5890 41 01 mounting Adaptor for upper wishbone 2699 5890 41 02 mounting Mandrel for installation of 2654 5890 32 01 clip ring on ball joint. Puller for removal of upper & 2654 5890 32 03 lower ball joints Fig. 4 - Jacking the wheel Fig. 6 - Removal of shock absorber Fig. 5 - Antiroll bar mounting on lower wishbone
RkJQdWJsaXNoZXIy MTIwNTUz