40 GEAR BOX G-76 MEASUREMENT OF CONTROL DIMENSIONS (FOR SELECTION OF SHIMS) OVER THE COUNTER SHAFT The control dimension to be maintained between Counter Shaft 3rd gear rear 198 ± 0.1mm face and housing face-Rear half. 1.0 Dimensions to be measured Symbol Example 1.1 Measure the dimension between Counter Shaft 3rd gear rear face and A 200.00 taper roller bearing outer race face. Fig. 76 and 77 1.2 Measure the rear cover depth. Fig. 73 and 76 B 2.30 1.3 Difference A-B C 197.70 1.4 Shims required : 198 - C D 0.30 Fig. 74 Fig. 73 OVER THE MAIN SHAFT The control dimension to be maintained between Main Shaft 2nd gear 197±0.1mm shoulder face front and housing face - Rear half 2.0 Dimensions to be measured Symbol Example 2.1 Measure the dimension between Main Shaft 2nd gear shoulder face front and taper roller bearing outer race face Fig. 75 and 76 E 202.00 2.2 Measure the rear cover depth Fig. 74 and 76 F 5.50 2.3 Difference E - F G 196.50 2.4 Shims required 197 - G H 0.50 F B
RkJQdWJsaXNoZXIy MTIwNTUz