36 GEAR BOX G-76 SUB ASSEMBLY OF MAIN SHAFT Hold the main shaft (41) vertically keeping the coupling flange end upwards. Slide reverse gear sub-assembly (37) on main shaft along with needle roller cage (36a) and engaging gear (32a) keeping engaging gear upwards. Fig. 57 Fit snap ring (31a) Select snap ring such that it is snug fit in the groove. Snap rings are available in thicknesses ranging from 1.7 to 2 mm in the step of 0.05 mm. Fig. 58 Slide the 5th gear sub-assembly (41) along with the needle roller cage (39) and synchro cone (30a) such that the synchro cone is towards engaging gear. Fig. 59 Slide spacer (40) Press taper roller bearing inner race (11a) with help of drift, Pt.no.2654 5890 26 05 such that taper is upwards. Ensure that bearing inner race is butting against spacer. Fig. 60 Fig. 59 Fig. 58 Fig. 57 Fig. 60
RkJQdWJsaXNoZXIy MTIwNTUz