30 GEAR BOX G-76 DISASSEMBLY OF GEAR BOX HOUSING - REAR HALF Loosen bearing block locking fit bolt (99) and remove bearing block (98). Fig. 43 Remove torsion spring (111) from selector lever pin (109) and take out torsion spring along with tubular spacer (110) Remove selector lever (108) along with roller (107) from housing. Fig. 44 Unscrew plug (135) and remove spring - Detent plate 5th gear (134). Unscrew plug (135a) and remove plunger - Reverse gear detent (137) along with spring (136). Fig. 45 Unscrew mounting screws (130) and take out pressure plate - reverse speed (132) along with pressure plate 5th gear (133). Loosen and remove Hex. screw (102) along with nut (105), spr. washer (104) and bright washer (103). Remove roller - detent plate (106), if required. Disconnect pressure plate 5th gear from pressure plate - Rev. speed. Fig. 45 Fig. 44 Fig. 43
RkJQdWJsaXNoZXIy MTIwNTUz