69 486 PL ENGINE P Fig. 171 Fig. 170 Fig. 169 Install alternator mounting bracket. Install cam phase sensor, Ensure correct distance between cam phase sensor and the phase pin on inlet cam shaft as specified. Fig. 168 Install dip stick outer on the block. Tighten front mounting bolt of fuel rail along with the bracket of the dip stick outer. Insert dip stick. Fit the by-pass pipe & 'T' connection tube from cylinder head to water pump inlet, elbow & oil cooler. Fit the hose from cylinder block nipple to oil cooler inlet. Fig 169 Install exhaust manifold along with its gaskets. Tighten nuts to specified torque. Fig. 170 Fit exhaust gas recirculation pipe along with its heat shield. Fig. 171 Fig. 168
RkJQdWJsaXNoZXIy MTIwNTUz