57 486 PL ENGINE P Apply anabond 611 sealant on par ting faces between 1st and 5th cap and cylinder head. Install cam shaft pressing tool (Pt No. 2699 5890 0602) at the spark plug location. Fig. 131 Press both the cam shafts. Fig. 132 Place all the bearing caps at their respective position as numbered. Fit bearing cap nuts with New washers Tighten to specified torque, first the middle cap and then move outwards. Fig. 132 Tighten mounting nuts of hydraulic chain tensioner. Fig. 133 Check the timing plate (Pt No. 2699 5890 0601) easyness when inserted in slots. Fig. 134 Rotate either of the camshaft if required. Fig. 134 Fig. 133 Fig. 132 Fig. 131
RkJQdWJsaXNoZXIy MTIwNTUz