33 486 PL ENGINE P Remove crankshaft main bearing and thrust washer and duly mark them with paint, in case they are to be re-used. Remove drive shaft spigot bearing from crank shaft using puller Pt. No. 2654 5890 0306. Fig. 63 Unscrew banjo bolt and remove assembly piston cooling nozzles from cylinder crank case. Fig. 65 Fig. 64 Fig. 63 Dismantling of sub-assemblies : Air Inlet Manifold. Remove bracket for accelerator cable. Fuel rail : Unscrew the two mounting bolts of fuel rail. Fig. 64 Unclip the restoring clip of injectors and pull the injectors out of the fuel rail. Fig. 65
RkJQdWJsaXNoZXIy MTIwNTUz