33 BODY 27. PROCEDURE FOR FIXING DOOR GLASS WEATHER STRIP AT ENDS (BOTTOM OF STYLING STRIP) ● Clean Weather strip ends with cleaner Terostat8550. ● Apply a thin coat of 3M adhesive promoter primer K-500 by brush. ● Allow to dry the primer for 3 minutes. ● Meanwhile clean the painted sur face with Terostat-8550. ● After 3 minutes apply 3M tape 4211 on edge of weather strip. ( Two row of strips of tape to be applied on ends) ● Remove the red papers from the tapes and press the weather strip on the painted surface for one minute. ● Put a removal adhesive tape on weather strip edges for holding it in position for some time. ● Do not disturb the weather strip for some time. 28. PROCEDURE FOR FIXING HAND BRAKE CONSOLE GARNISH ● Adhesive used is Vamloc TL-472M. ● Put the extension nozzle (provided with the pack) on the bottle. ● Apply thin layer of adhesive on the grooves uniformly. Do not use excessive adhesive on the grooves, it will reduce adhesive strength. ● Fix the garnish in the console slot and press the garnish long side towards the slot walls for one minute. ● Do not disturb the garnish for some time.
RkJQdWJsaXNoZXIy MTIwNTUz