17 BODY 12. REMOVAL/INSTALLATION OF DOOR MIRROR (Fig. 17) REMOVAL ● Pry out plastic cover on mirror mounting screws carefully, from inside of the door. ● Disconnect wiring harness connector of the mirror. ● Hold the mirror, remove 3 mounting screws and remove the mirror. INSTALLATION ● Locate mirror on the door properly. ● Bring the motor harness connector inside from the hole provided in the door. ● Hold mirror properly in such a way that the three mounting points align with the holes provided in the door. ● Fit and tighten the 3 mounting screws of the mirror. ● Connect the wiring harness connector of mirror. ● Fit the plastic cover from inside. Fig. 17. 1. COVER 2. MOUNTING SCREWS 3. DOORMIRROR 3 1 2
RkJQdWJsaXNoZXIy MTIwNTUz