13 BODY 8. REMOVAL/INSTALLATION OF DOOR INNER HANDLE (Fig. 9 & 10 ) REMOVAL ● Remove inner handle housing screw 2 and then remove housing. ● Remove the inner trim. ● Pull out required portion of plastic membrane. ● Disconnect links from inner handle. ● Remove 3 mounting screws. ● Remove inner handle. INSTALLATION ● Locate inner handle on the door panel ● Install a washer, cr. pan. hd. screws (M6x16) and tighten the screws. ● Connect links to inner handle properly. ● Apply sealant (Butyl mastic) on the door inner panel and fix the plastic membrane on it. ● Fit the inner trim. Fig. 9. 1. MOUNTING SCREWS 2. HOUSING SCREW 3. INNER HANDLE REAR DOOR 1 3 2 Fig. 10 Assy. door handle inner DOOR INNER HANDLE
RkJQdWJsaXNoZXIy MTIwNTUz