8 BODY 3. REMOVAL/INSTALLATION OF FRONT/REAR DOOR INNER TRIM (Fig. 1 & 2) REMOVAL Note : Disconnect battery before doing repair work on the body. ● Open the door. ● Remove 2 mounting screws of door pull and remove the door pull. ● Remove the mounting screw of inner handle cover and door pull. Remove the cover and door pull. ● Remove the decorative caps at the top 1 No. for front and 2 No. for rear door and remove 3 mounting screws viz. 1 at side and 2 at bottom for front door. (3 at side and 2 at bottom for rear door trim) ● Pull out the door trim halfway and disconnect power window switch connector, speaker connector and courtesy lamp connector. Disconnect mirror switch connector for driver door. ● Remove the trim. INSTALLATION ● Replace the trim fixing clips. ● Locate the trim on the door. ● Connect courtesy lamp connector and power window switch connector to speaker connector wiring harness. Connect mirror switch connector for driver door. ● Ensure that 7 trim clips are properly located in mounting holes for front door (6 trim clips for rear door). ● Press the trim on the door properly. ● Fit the (door pull) using 2 sl. ch. screws and tighten the screws. ● Fit the cover of inner door handle with cr pan hd screw M6x16. ● Fix decorative caps. (1 for Front & 2 for Rear Door Trim) Fig. 1 - Front Door Fig. 2 - Rear Door 1 2 3 1. INNER HANDLE COVER 2. DOOR PULL 3. DOOR INNERTRIM 1 2 1. INNER HANDLE COVER 2. DOOR PULL 3. DOOR INNERTRIM 3
RkJQdWJsaXNoZXIy MTIwNTUz