ELECTRICALS 93 7. The Assembly should look like the photo below. (Fig.9) 8. Connect the 4- pin mini DIN of module box to CCD camera side wiring 4- pin mini DIN, properly matching white arrows on both connectors. (Fig.10) Cover the joint by good insulation tape, to avoid water entry. This is done just before Bumper is mounted on the vehicle. For dismantling or replacement please follow the reverse steps. Important: For removing camera, 4 clips on the camera housing need to pressed & then camera is to be pushed out from 25 mm dia. hole in Tow Cover. Take care that Metal Pad Lock is not damaged during this. Tow Cover of Tata Safari is sealed from inside using omega clips / z type brackets, unlike other Safari Models. This Tow Cover should not to be removed by a screw driver / or by any other force to avoid damage to Camera or Module box. For replacing camera / module box, removal of bumper is necessary. CAMERA CAP: To be used only when vehicle is to be serviced / washed using high pressure water jet. In normal operation it should be kept in glove box. MIRROR CUM MONITOR: Procedure to install the Mirror cum Monitor on to Stem Mount (Mirror Button) fixed on the Windshield. 1. To hold the Mirror firmly using Stem of the mirror in normal viewing position. (Fig.11) Fig. 9 Fig.10 Fig.11
RkJQdWJsaXNoZXIy MTIwNTUz