ELECTRICALS 91 SAFETY PRECAUTIONS : Make sure to read the “Service /User Manual” for safety precautions before opening / replacing / servicing the system. Please make sure the vehicle is well parked at a safe place and the engine and the power of the vehicle are switched off. Avoid installation outdoors under a thunder/raining situation. INSTALLATION : Follow these steps to install the Camera & Module Box on to Bumper Assembly: (This is done before Bumper is fixed to Vehicle & when Bumper reinforcement is not yet mounted) 1. Insert (Camera) Cap-Ring /Base on to Camera Housing until it clicks on to 4-Camera clips, keeping broad side facing the same side as Camera Lens. 2. Push Camera firmly thro’ 25 mm dia. hole provided in the Tow Cover (Fig.2) from connector side until it clicks on to 4-Camera clips. Please turn the white mark on the camera to top side. This will ensure that image on the Monitor will be up-right & not inclined or up-side down. (Fig.3) 3. Insert Metal Pad Lock on Camera Housing until it touches inner side of Tow Cover & until it clicks on to 4-Camera clips. (Fig.4) Fig.1 Fig.2 Fig.3 Fig.4
RkJQdWJsaXNoZXIy MTIwNTUz