ELECTRICALS 8 Fig. 7 Fig. 6 6. Alternator : Removal : Fig. 6 & 7 ● Disconnect battery earth lead. ● Loosen nut securing cable to alternator and release cable. ● Disconnect multiplug from alternator. ● Remove nut and bolt securing alternator to adjustment bracket. Note : For more details on removal / fitment of alternator, starter moto refer Engine Group. ● Loosen bolt securing alternator to engine. ● Release drive belt tension by turning the tension adjusting bolt anti-clockwise. ● Release drive belt from alternator pulley. ● Remove nut and bolt securing alternator to engine. ● Release alternator from bracket and remove alternator. Fitment : ● Position alternator to engine and locate in support bracket. ● Fit nut and bolt securing alternator to engine, but do not tighten. ● Clean pulley vee‘s. ● Locate drive belt to alternator pulley. Ensure grooves on drive belt and pulleys are correctly located. ● Fit nut and bolt securing alternator to adjustment bracket. ● Adjust drive belt tension. ● Connect multiplug and cable to alternator, fit and tighten cable nut. ● Connect battery earth lead.
RkJQdWJsaXNoZXIy MTIwNTUz