FUEL SYSTEM 6 Fig. 6 Fig. 8 Calibration Details : Float Position Empty Half Full Float Height 16.5+2 133+2 262+2 Resistance 10 104 186 1N OHMS Tolerance +0 +8 +8 in OHMS -4 Fig. 7 FUEL GAUGE TANK UNIT Removal : ● Remove electrical connections. ● Remove 6 screws securing Float Unit from the fuel tank. ● Remove seal from the Float Unit. Fitment : Please follow reverse procedure Assembly : When installing fuel tank gauge, ensure that fuel tank gauge unit assembled with O ring in place. Testing / Checking : Fig. 7 & 8 The sender is a float operated rotary potentiometer which provides a variable resistance to ground for the output from the gauge. When the sender float is at its lowest point, indicating an empty fuel tank, the resistance to earth is at its lowest. The resistance is sensed by the gauge which positions the needle accordingly. Use ohm-meter to confirm that the resistance of the fuel level sensor (Fuel Tank Unit) changes with the level of float position. 15.00 DETAIL ‘A’ SCALE N S B 75.00 M4.00 X0.7 B T (90.00) 37.50 4.00 169.00 Fuel Tank Unit R176.00+2 HALF EMPTY RESERVE
RkJQdWJsaXNoZXIy MTIwNTUz