1 ABS - ECU DIAGNOSTIC The system software is a user friendly. The user can load it on laptop/Desktop. The vehicle interface unit is light weight and compact in size to facilitate easy portability. This works on vehicle battery supply. This tester will execute all the commands supported by ECU , which help in diagnostic of the ABS system. This diagnostic unit is capable of performing the following functions : 1) Read Complete ECU Status ● No of DTC’s ● Valve Relay ● Wheel Speed ● Motor Status ● Valve Status ● Brake Light Switch ● Warning Lamp Status ● Battery Voltage 2) Read DTCs i.e. Read Diagnostic Failure Codes 3) Clear DTCs 4) Actuate Components Like (Motor , Inlet Valves front & Rear ,Outlet Valves front & Rear) 5) Warning Lamp Test 6) Brake Bleeding 2. Detailed Description : Required power supply : The Vehicle Interface Unit does not require any external power supply . It works on vehicle battery , provided through the OBD cable . Connect the RS232 cable to the Laptop/Desktop COM port The OBD cable is connected to the Diagnostic connector of the wiring harness. 3. Specification 3.1. Laptop / PC Operating system : WIN 98/ WIN 2000 /WIN XP or later version CPU Speed : 933 Mhz or greater RAM : 128 MB Video Display : 800 x 600 resolution with 24 bit colour RS232 port : Minimum 1No. CD ROM Drive Printer Port (optional) The software works with the above features of a Desktop/ Laptop . Any other combination of speed and RAM less then specified will slow down the response of the software. 3.2. Vehicle Interface Unit Interface unit from M/s Silicon Engines , USA OBD cable RS232 cable
RkJQdWJsaXNoZXIy MTIwNTUz