PROPELLER SHAFT 4 LIST OF SPECIAL TOOLS Sr.No. Description Part No. 1. Holder for coupling yoke 2698 5890 35 05 or 2698 5890 41 02 2. Puller for center bearing 312 589 25 33 3. Socket for end yoke nut. 2698 5890 41 01 SERVICE DATA Tightening Torque : End Yoke nut 14 - 16 mkg Bearing strap retaining bolt 1.8 - 2.2 mkg. Transfercase End Yoke / Gearbox End Yoke Bolt 4.1 - 4.7 mkg Adjustment Data : Maximum permissible displacement in lateral axial 0.15 mm. direction under load of 3.3 kgm. Maximum permissible radial or axial looseness 0.18 mm. between the slip yoke & tube shaft Maximum Permissible dynamic unbalance For 4x4 : 18 gm cm at 3200 rpm. For 4x2 : 36 gm cm at Gearbox and Axle End 27 gm cm at Centre bearing location Runout to be measured within 12.7 mm of tube 0.76 mm length centre and within 80 mm of tube-weld location at both ends Grease splines at the intervals. 5000 km. / 3000 miles Use : W/NLGI 2 - Grade grease for slip spline
RkJQdWJsaXNoZXIy MTIwNTUz