88 4 DLT ENGINE F.I.P. TIMING SETTING PROCEDURE (LUCAS PUMP) 1. Lock the flywheel in TDC position (with FIP gear and camshaft gear holesmatched as per procedure followed for timing belt fitment) by inserting locking pin 2654 5890 0307 through the cylinder block rear wall into the flywheel. 2. Remove sealing plug on FIP located at the top. Refer figure. 169. Insert timing rod (2654 5890 06 01) Lucas part no.: 9190-212. Refer figure. 170. Fit assembly timing bracket (2654 5890 06 02) Lucas part no.: 1804- 607 and dial gauge using clamping screw provided on the timing bracket. Refer figure 171 Loosen high pressure pipe lines from FIP, if fitted. Fig. 170 Fig. 171 Fig. 172 Fig. 169 (For setting timing on vehicle, use assembly timing bracket (2654 5890 06 03) Lucas part no. : 1804-606. Refer figure. 172)
RkJQdWJsaXNoZXIy MTIwNTUz