ENGINE 82 Fig. 5 INSTALLATION 1 Insert push rods in their respective positions (if marked for identification). 2 Clean base of rocker shaft brackets and their seats on cylinder head and fit rocker shaft assembly on cylinder head and tighten bracket mounting bolts slightly. Before tightening rocker shaft bracket bolts, see that ball pins are loosened to prevent undue pressure on push rods and that rocker shaft mounting bolts with threaded heads are fitted in correct positions for cylinder head cover mounting. 3 Tighten rocker shaft bracket mounting bolts to specified torque. Fig. 5. 4 Adjust valve clearance in cold condition.
RkJQdWJsaXNoZXIy MTIwNTUz