ENGINE 8 15. Accelerator Pedal Accelerator pedal Module The Sensor serves to measure the position of the accelerator pedal. It has two potentiometer for measuring the position of accelerator pedal from 0% travel position to 100% travel position. The accelerator pedal module is part of accelerator pedal as shown in the figure. Tightening torque of the retaining screws : 9 Nm. Specifications: Operating voltage : 5 ± 0.3 DC Short-circuit protection : 60 min. at 16 V Double-potentiometer Potentiometer 1 : 1.2 kΩ ± 0.4 kΩ Potentiometer 2 : 1.7 kΩ ± 0.8 kΩ Checking Procedure : The resistance values can be checked with help of a multimeter as per the circuit diagram shown above. The Accelerator pedal module is not repairable. The checking procedure is to ascertain whether the Accelerator pedal module is defective or not. If defective, the accelerator pedal with module has to be replaced as an assembly. 1 Accelerator Pedal Layout 1. Assy. Bracket 2. Accelerator Pedal 3. Hex. Flange Screw Precaution Sensor connections should not be removed unnecessarily
RkJQdWJsaXNoZXIy MTIwNTUz