55 GEAR BOX G-76 Apply adhesive gasket eliminator over rear cover face. Placemeasured shims of main shaft and counter shaft at the seat of rear cover. Fit rear cover to housing half - rear. Put hex nuts (65) along with bright washer (66) and spring washer (67) and tighten them. Ref Fig. 124 Press coupling flange over main shaft rear end. Fit collared hex nut and tighten it to the specified torque of 24-28 mkg. Ref Fig. 125 For securing main shaft nut; collar to be staked in the slot. Stake the collar in undercut with suitable chisel to secure the nut. (For Telco make) Slide washer over selector shaft in the housing and then press oil seal with suitable drift. Fit bracket - extension arm to the housing. Ref Fig. 126 Fig. 124 Fig. 125 Fig 126
RkJQdWJsaXNoZXIy MTIwNTUz