49 GEAR BOX G-76 Fit locating piece reverse shifter shaft in the housing with the help of socket head cap screw and spring washer such that it sits properly. Fig. 109 Fig. 109 Fit spacer and oil seal in housing before shifter and selector shaft. Ensure proper direction of oil seal lip. SHIFTER SHAFTS AND SHIFTER FORKS 22. ASSEMBLY OF SHIFTER AND SELECTOR SHAFTS There are three shifter shafts, one selector shaft and one shifter shaft for reverse speed. Assembly of 1st/2nd shifter shaft This shaft is having two Nos. holes for spiral pins approximately at the centre of the shaft. Hold shaft horizontally keeping notch upward and towards yourself. Slide shifter dog 1st/2nd over shifter shaft from other end such that shaft relieving radius is at top and towards right side. Align shifter dog with outer hole of shaft and press spiral pin. Select shifter fork 1st/2ndwhich is having engaging collar at centre and slide over shaft. Align it with shaft hole and press spiral pin. Fig. 110
RkJQdWJsaXNoZXIy MTIwNTUz