69 4 DLT ENGINE Ensure that cylinder head locating hollow dowel is in position on crank case. Ensure that timing pin 2654 5890 03 09 is installed in position. Install cylinder head and tighten cylinder head mounting screws to 5 mkg torque in the correct sequence i.e. from centre to outwards.Then retighten screws to 7 mkg torque in the same sequence. Then tighten to 10.5 mkg torque. Refer Figure 136 Fit belt tensioner locking screw and timing gear train rear cover mounting screw at cylinder head. Install wood ruff key, cam shaft gear and spacer. Tighten cam shaft gear mounting screw to specified torque use spl. tool 2654 5890 05 01. Refer Figure 137 Fit - Inlet manifold. - Exhaust manifold. Refer Figure 138 - EGR vlave assy. (if fitted) Figure 139 Fig. 137 Fig. 138 Fig. 139 Fig. 136 4 3 1 2 Vacuum Hose from Solenoid Valve EGR Valve EGR Tube
RkJQdWJsaXNoZXIy MTIwNTUz