64 4 DLT ENGINE Install rear oil seal using drift, 2654 5890 03 04. Refer Figure 119 Locate flywheel on crank shaft rear flange. Install locking plates and screw-in flywheel mounting screws. Tighten flywheel mounting screws to specified torque. Refer Fig. 120 Lock them by bending lock plates. Refer Fig. 121 Remove connecting rod bearing cap with shell. Insert connecting rod in piston such that combustion cavity on piston and bearing shell lugs on connecting rod are on same side. Refer Figure 122 Fig. 120 Fig. 121 Fig. 122 Fig. 119
RkJQdWJsaXNoZXIy MTIwNTUz