ELECTRICAL 210 REMOVAL: 1.Pry out the rear quarter bulb access cover RH.( Snap fitted ). 2.Disconnect electrical connection. 3.Remove two mounting bolts of controller. 4.Take out the controller. REFITMENT: 1.Fit the controller on the rear quarter trim side facing RH. 2.Tighten the two mounting bolts. Tightening torque for Bolts -0.6 Kgm. 3.Connect the electrical connection. 4.Fit the rear quarter bulb access cover RH. 3. IRVM: The IRVM display is used to display the information provided by reverse parking system with ultrasonic sensor system. When Reverse Gear is applied, Display will switch to the reverse parking system with ultrasonic sensor display on the IRVM screen. For Removal & fitment details refer body section.
RkJQdWJsaXNoZXIy MTIwNTUz