ELECTRICAL 208 CONNECTION DETAILS: REMOVAL: 1.Remove rear bumper. (Refer body section). 2.Disconnect the electrical connection of sensor. 3.Snap out the sensor from its housing and take out the sensor. REFITMENT: 1.Carefully snap fit the sensor into housing by aligning the locator of the sensor. 2.Connect the electrical connection. 3.Fit the rear bumper. 2. REVERSE PARKING SYSTEM CONTROLLER: FUNCTION: The controller contains a voltage stabilizer for the sensors, an integrated microprocessor and all the interface circuits needed to adapt the different input and output signals. The controller will perform the following functions: Sensor activation and echo reception Obstacle proximity estimation Activation of the warning elements Evaluation of the input signals from the vehicle Monitoring of the system components including fault storage Provision of the diagnostic function FEATURES: Obstacle distance detection – 0.3 m – 1.2 m. Buzzer works only when ignition is on and reverse gear is applied. Obstacle information to IRVM will be transmitted only when ignition is on and reverse gear is applied. SPECIFICATION: Normal voltage 12 Vdc ,-ve gnd Operating voltage 9 to 16 Vdc Operating temperature -30 °c to +80 °c Storage temperature -40 °c to +85 °c Obstacle detection 0.3 to 1.2 m
RkJQdWJsaXNoZXIy MTIwNTUz