ELECTRICAL 149 ELECTRICAL 4. CONVENIENCE: SIGNAL LEVEL TYPE Battery High Input Driver Door Switch Low Input Co-Driver Door Switch Low Input Rear Left Door Switch Low Input Rear Right Door Switch Low Input Approach light RF Input Head Lamp Switch High Input Power mirror fold / unfold switch High Input Parking/Side Light Switch High Output Dip/Low Beam Relay High Output Interior lights PWM Output Mirror fold relay PWM Output Mirror unfold relay PWM Output A. DELAYED ACCESSOREY POWER OFF: The BCM Accessory Relay output is connected to the Window winding controller and the BCM Accessory delay Relay. Whenever the vehicle power state is IGNITION or RUN the BCM Accessory Relay output should be high. When the vehicle engine is stopped by the user, the accessories should remain powered for a time period to allow powered functions to be performed without turning the key to the ignition position again. (E.g. close electric windows and sunroof). When the vehicle power state changes from IGNITION to OFF or KEY IN SENSOR, the BCM Accessory Relay output will remain high for 10 minutes. NOTE: If driver door is opened then Acc delay will get immediately cancelled. Accessory delayed functionality should be cancelled after user successfully locked the vehicle by remote and provided two flashers feedback.
RkJQdWJsaXNoZXIy MTIwNTUz