ELECTRICAL 115 ELECTRICAL REMOVAL: 1.Remove the glove box assembly (Refer Glove box removal procedure in body section). 2.Remove the two mounting bolts of BCM mtg bkt mounted on assembly dash cross member. 3.Tilt the BCM mtg bkt and disconnect the electrical connection of window winding controller. 4.Remove the two mounting bolts. 5.Dislocate the window winding controller from the locator. 6.Take out the controller. REFITMENT: 1.Locate the window winding controller on the locator. (Refer above given exploded view of window winding controller while fitment) 2.Tighten the two mounting bolts of window winding controller on the BCM mtg bkt. Tightening torque for bolts – 0.6 Kgm 3. Connect the electrical connection. 4. Tighten the two mounting bolts of BCM mtg bkt on the assembly dash cross member. Tightening torque for bolts – 0.6 Kgm 4. Fit the glove box assembly.
RkJQdWJsaXNoZXIy MTIwNTUz