ELECTRICAL 85 ELECTRICAL COMBI SWITCH CHILD PARTS: STALK REPLACEMENT: REMOVAL: 1.Remove the both assy nacelle upper and lower. 2.Disconnect the wiring harness connector from the combi-switch stalk. 3.Remove two mounting screws of the lever as shown in below given figure. 4.Take out the defective stalk. REFITMENT: 1.Align the new stalk in the combi-switch housing. 2.Fit the two mounting screws. Tightening torque for screws – 0.06 Kgm. 3.Connect the electrical connection to the switch. 4.Snap fit the assy lower nacelle and assy upper nacelle, and tighten the three mounting screws in the assy nacelle lower.
RkJQdWJsaXNoZXIy MTIwNTUz