ELECTRICAL 48 5.Remove the defective high beam bulb and replace with new one. 6.Lock the retainer blub spring to its position. 7.Connect the electrical connection. 8.Fit the rubber dust cap. LOW BEAM (H7, 12V, 55W) 1.Open the bonnet. 2.Remove the rubber Cap / Socket cover on the backside of headlamp. 3.Disconnect the electrical Connection of bulb 4.Release the retainer bulb spring, which holds the bulb by pressing 7 moving it upward. 5.Remove the defective low beam bulb and replace with new one 6.Lock the retainer blub spring to its position. 7.Connect the electrical connection. 8.Fit the rubber dust cap.
RkJQdWJsaXNoZXIy MTIwNTUz