STEERING 43 STEERING 4. Never store steering gear resting on its feed pipes. 5. Never store / transport steering gear with bellows / feed pipes fouling with other objects. 6. Never remove port plug before connecting with mating parts. 7. Do not remove the feed pipe assembly from the gear port; remove it only when replacing the feed pipe. 8. Never use cotton waste which will cause contamination. 9. Do not adjust ball joint nuts except during wheel alignment 10.Never lift steering gear by holding IBJ’s. NOTE Bellow is a seal. Do not use sharp tools near bellows if it can damage bellows. ! CAUTION Damaged bellow or absence of clip can cause water ingress and subsequent failure of Power steering.
RkJQdWJsaXNoZXIy MTIwNTUz