STEERING 40 NOTE Use new metal strap for assembly. 3. Put the bellow metal clip at the big end of bellow and lock it using plier. NOTE Use new metal strap for assembly. 7.3.3.3 INNER BALL JOINT (IBJ) 1. Remove the OBJ assembly. (For procedure refer OBJ dismantling procedure in this section.) 2. Remove the bellow from the IBJ. (For procedure refer bellow dismantling procedure in this section.) 3. Keep the steering gear in centre position by rotating the input shaft. (Turn the input shaft lock to lock and count the total number of turns and bring back to the half of total turns for centre position from one end.) 4. Hold the rack using suitable tool which should not damage the rack. 5. Unscrew the IBJ from the end of the rack using open end spanner. ! CAUTION Inner ball joints have left hand threads; it will tighten when rotating in anticlockwise direction and loosen when rotated clockwise when view from its OBJ end. 6. Remove the IBJ from the rack assembly. NOTE
RkJQdWJsaXNoZXIy MTIwNTUz