STEERING 26 CAUTION Care should be taken such that selfcancellation lugs do not get damaged (selfcancellation lugs are shown in below figure with arrows). INSPECTION: Check for any damage to self-cancellation lugs, if found, replace complete steering wheel INSTALLATION: 1. Align the marks made on the steering wheel and the shaft. Install steering wheel on steering shaft. 2. Tighten the steering wheel nut to the specified torque. 3. Tightening torque (Steering wheel nut) = 4Kgm 4. Fit horn pad (Press fit type). 5. Connect battery. 1.2.3 ON VEHICLE REPAIRS 1.2.3.1 STEERING WHEEL REMOVAL (Without DAB) 8. Park the car with front wheel in straight ahead position. Apply parking brake and place wheel chokes at rear wheels. 9. Disconnect battery. 10. Pull out the horn pad. WARNING Before removing steering wheel make alignment marks on the steering wheel and the shaft for guiding during reinstallation. 4. Remove the steering wheel nut.
RkJQdWJsaXNoZXIy MTIwNTUz