ANTI LOCK BRAKING SYSTEM (ABS) 17 ANTI-LOCK BRAKING SYSTEM (ABS) (ii) Lock the lever to it’s unlocking position by pressing the lever till the Click sound is heard and remove the connector from ABS ECU. !! WARNING Never apply a 12V power source to any terminal of the ECU connector when it’s disconnected. 3. Identify the brake pipes going into and out of the Hydraulic Unit (HCU) with tags so that reinstallation of the brake lines becomes easy. NOTE Proper care should be taken before disconnecting the brake pipes from HCU and the HCU must be thoroughly cleaned on the outside to prevent any dirt particles from falling into the ports of HCU or entering the brake pipes. 4. Remove the brake pipes from MC (1) and feed pipes to calipers (2) from the HCU and plug the ports with suitable grommet / Cap. 5. Loosen the 2 holding nuts of the ABS ECU.
RkJQdWJsaXNoZXIy MTIwNTUz