BRAKES 61 BRAKES 3 Make sure all sides of the boot have covered the piston. Insert the piston by pushing the hand bar against air pressure through caliper, so that piston can be pushed into the housing easily. 4 Ensure that seal does not get damaged due to excessive push. If required, slightly swivel the piston for ease of entry. The moment you get a feel that piston has entered the seal immediately stop air flow and then push the piston till bottom of caliper. 5 Ensure the outer end of the dust boot is properly seated in the piston groove and check for free movement of the piston.
RkJQdWJsaXNoZXIy MTIwNTUz