BRAKES 55 BRAKES 7. Keep the wooden piece in between the plunger and the caliper housing and blow dry compressed air into the caliper gradually through the inlet port (Where banjo bolt is connected). Now you will observe the piston coming out of the caliper gradually. 8. Remove the piston from the caliper housing. 9. Remove the piston boot from the caliper housing. 10.Follow the same procedure for the other piston also. 11.Remove the sealing rings from the grooves in the caliper housing one after the other. 12.Remove the bleed screw from the caliper housing.
RkJQdWJsaXNoZXIy MTIwNTUz