BRAKES 32 3. Pull out and remove the excluder from the booster clevis. 4. Remove the filter cup from the booster assembly. INSPECTION Check the external filter, excluder and filter cup for any cut, damage etc. If it is blocked do not clean and reuse, replace it with new one. FITMENT For fitment follow reverse procedure of removal. H. GREASING DRUM IN HAT SHOE LINING GREASING 1 Remove the rear brake disc. (For procedure refer brake disc removal process in this section.) 2 A thin film of “Lithium Based Grease” to be smeared at below given locations. 3 Clean the location where grease to be applied. Keep grease away from shoe lining. CALIPER GREASING Loosen and remove the sliding pin and grease them with the special grease which is provided for brakes. NOTE Check the sliding pin boot for any cut or damages. If any defect is found replace the boot.
RkJQdWJsaXNoZXIy MTIwNTUz