PROPELLER SHAFT 17 PROPELLER SHAFT generously lubricating the seal lip and press it over slip yoke using a small arbor press. 8. Assemble tube shaft and slip yoke, making sure that the alignment marks are in line. This will ensure that slip yoke lugs and tube yoke lugs are in line. 4.4.3.3 CENTRE BEARING DISMANTLING NOTE The unitized one piece seal used on Spicer propeller shaft is not intended to be removed in service. To separate the tube shaft from the slip yoke, pull the tube out of the slip yoke, leaving the seal in place. A significant amount of force is required to remove as well as reinstall the tube shaft through the seal. Removal of the unitized seal causes damage to the seal lip where it contacts the slip yoke. 1. Unstake the clamping strap and remove centre bearing bracket. Slide off rubber housing from centre bearing assembly. 2. To remove the old seal, hold the yoke assembly firmly in a vise. Drive the seal off the yoke.
RkJQdWJsaXNoZXIy MTIwNTUz