PROPELLER SHAFT 14 4.4.3.2 UNIVERSAL JOINT DISMANTLING 1. Using a soft drift, tap the bearing assembly to loosen snap ring. 2. Remove snap ring from yoke. Turn the joint over, tap bearing away from snap ring and then remove opposite snap ring. 3. Set the yoke in the arbor press with a piece of tube stock beneath it. Position the yoke with the tube fitting bearing up to prevent interference during disassembly. 4. Place a solid plug on the upper bearing assembly and press it through to release the lower bearing assembly. 5. If the bearing assembly will not pull out by hand after pressing, tap the base of the lug near the bearing assembly to dislodge it.
RkJQdWJsaXNoZXIy MTIwNTUz