FRONT AXLE (4X2) 10 4.5.1.3.2 HUB REPLACEMENT REMOVAL 1. Hold the hub assembly using holder (Part No. 287058903316) and remove hex nut. This action should be performed on vehicle. NOTE Discard the hex nut once removed and use new one at the time of assembly. 2. Remove the stub axle assembly from the vehicle. (For removal refer on vehicle removal in this section.) 3. Remove spacer (1) and internal circlip (2) using circlip plier. 4. Support the brake disc and press the stub axle shaft to separate it from brake disc and hub assembly. 5. Hold wheel hub and brake disc assembly on suitable fixture. Loosen brake disc mounting bolts and take out the brake disc.
RkJQdWJsaXNoZXIy MTIwNTUz